July 2016 Newsletter

July 2016 Newsletter

July 2016 Newsletter
Eric, Carrie, Nancy, Brandon, Judy, Tom, Drew, and Brenda being trained for the new software system.

Here we are in July with half of 2016 already behind us. As was mentioned in our January newsletter, our plan this year was to take a break from building projects and focus on a complete revamp of our point of sale software. We are happy to report that we are well on our way to making this a reality by year’s end. Different companies have been researched and we have decided to move forward with IFS Software. The soft-ware is very adaptable to the ever changing and different types of repairs that we do. This new system will be sufficient to carry our workload easily into the next decade. We have begun training and hope to go live with at least some of the divisions by late this fall. This is a huge undertaking, but we want to move at a pace that will not interfere with our everyday business and with the least disruption to our customers.
Thank you and have a great summer,
~ The Managementall phase hydraulics newsletter

January 2016 Newsletter

Welcome to our January 2016 Newsletter

Welcome to 2016, the year we celebrate our 27th year in business. As we enter the New Year, we take pause once again to acknowledge the faithfulness of our God in preserving us as a business. We recognize that we are only instruments in His hand and that Speed Wrench is only a small part of His Greater Purpose. Knowing what that purpose is, we must daily seek the will of the Almighty to give us direction. We pray for the wisdom to follow where He leads.

We are now settled in after our building expansion last year and have been focused on fine tuning business. We are constantly asking you, our customers, “Where can we improve?” Your feedback is greatly appreciated and is used to bring forward the best products and services possible. Thank you for your continued patronage.

Our project this year is a total upgrade to our point of sale software. In the past four months we have been researching software for the entire company. We have outgrown our old system both in size and diversity and need to upgrade to stay up with ever changing technologies and business opportunities. We are finishing up the vetting process and hope to begin changing things over starting this month. To keep from disrupting daily business, we have decided to phase this program in over the next 6-8 months. We will bring you an update in our July Newsletter.

Thank you & have a blessed New Year,

~ The Management

Nancy Swatt-Since Nancy became an employee of All Phase as an administrative
assistant, her life has been a constant whirlwind of change. In just two months, she not only started her position with us, but also moved from
Traverse City and got married! In her spare time, Nancy enjoys camping and reading, as well as spending time with her 5 children.

Richard W. King – Richard joined our manufacturing division by a recommendation from his father, Richard F. King, who works as a Cylinder Technician in our repair division. Rich Jr. takes part in the areas of assembling, painting and packaging newly manufactured cylinders.

In The Shop

The picture below is of a custom built
power unit we designed and assembled
for the customer. We then went to the
customer’s location and installed the
unit, replacing the lines of the system

Hydraulic Cylinder Reseal

“The Cylinder Manufacturing division continues to
grow. We are shipping more and more units on a
monthly basis and continue to develop new, loyal
customers. We expect to take on much more
business in 2016!” – Steve Gaffin, VP of Cylinder Manufacturing

July 2015 Newsletter

Welcome To Our July 2015 Newsletter

2015 is half way over and it seems like we just got started. There is always a lot of excitement happening at Speed Wrench and the first half of this year was no exception. The one good thing is that we have our building projects behind us (for now) and we are concentrating on the business of doing business. Some areas that we have been focusing our attention this year:

Geographical:
1. Detroit – Probably the best and fastest growing business climate we have experienced in a long time. Brings back memories of Grand Rapids area in the 90’s, when housing was growing at breakneck speed. Currently, we have 4 resident technicians and a full-time salesman from our Speed-Tech division working that area.

2. Kalamazoo/Battle Creek – We currently have a resident technician from our truck divisions in this area full-time to service our customer base there, and are looking for additional help within 6 months.

3. Traverse City – Two resident technicians with assistance from GR-based technicians, also in the

Speed-Tech division. Business opportunities:
1. Our crane repair business has been growing steadily since we split that off into a separate division

2 years ago, and currently we have 4 service technicians focused in this area. We have had preliminary discussions of additional building space to accommodate this area of growth and have purchased property next to the Speed Wrench campus in anticipation of future growth needs.

2. We have experienced continued growth in our Body Shop division. Currently we have 5 technicians working this area and are hoping to add 1 additional employee this summer.

3. We have applied and been granted our dealers license to buy and sell used trucks. We hope to use the license primarily to assist our customers with their specific truck purchase needs.

As you can see, we at Speedwrench have been busy looking for and improving on areas in which we can enhance our customers service experience in a positive way, and help them in any way we can to reach their business demands and goals.newsletter-july-2015-online-copy
~ The Management

All Phase has continued to experience growth in both of our divisions. In order to keep up with the growth there have been a few changes. We have added two new pieces of equipment, a third pick up and delivery vehicle, as well as some new faces:

Josh Miner – Josh wears many hats helping in most areas of the operation including machining, welding, assembly, painting and packaging

Rich Ponstein – Rich joined our team this past winter. He is driving our third pick up and delivery truck.

Janelle Walma – Janelle joined our team this past May as our new Administrative Assistant.

Adrian Marcano-Kruz – Adrian came to us with hydraulic cylinder manufacturing experience and fills many roles including assembly, painting and packaging. Adrian is also instrumental in helping keep our inventory organized.

Bryan Martinez – Bryan came to us with hydraulic cylinder manufacturing experience and is a full time machine operator for us.

Hydraulic Cylinder Repair

We have added a new
Fryer 6’’ CNC lathe to
help speed up the turnaround
for the cylinder
repair division!

We also added a new
HAAS VF 3YT
machining center to
our operation. This
machine expands our
in-house capabilities
and increases
fabrication speeds on
many parts!

January 2015 Newsletter

Welcome to Our January 2015 Newsletter

“In everything give thanks: for this is the will of God in Christ Jesus concerning you.” (1 Thessalonians 5:18)
As we move into the year 2015, we stop and look back on 25 years of God’s faithfulness in preserving us as a company. Many things could be said about how we got to this point, but none of that matters unless the Lord is with us. As we look forward to the new year, we ask Him to continue to lead and guide us in this Kingdom work that He has entrusted to us.

Lots of new things happening again this year! Here are some of the highlights:
1. All Phase Hydraulics finished their move into the new 20,000 square foot addition and are settling in nicely.
2. The Body shop division continues to expand their areas of expertise and broaden their horizons on work that they can perform.
3. Speed-Tech Equipment has been searching for a new technician to add to the Detroit branch as we continue to build a customer base in that area.

Again, we encourage you, our customers, to give us feedback on the work we are performing for you and what you would like to see from us. To those of you who have already made suggestions or commented on our work, thank you!
~ The Management

2014 has been an exciting year for All Phase! Some of the highlights were:
1) Settling into our new building.
2) Putting our new pump test stand in operation.
3) Ordered another lathe, which we are hoping to see come February 2015!
4) Added multiple new team members!

Kristal Boorsma – Administrative assistant
Austin VanDyke – Cylinder technician
Travis Healey – Cylinder technician
Brent Visser – Cylinder technician
Tim Key – Pump/motor technician
Aron Wheel – Parts manager
5) Built additional space to keep up with the growth of the manufacturing division.
With these changes in place, we are excited to see what 2015 has to bring and look forward to better
servicing our customers!

For the past year, All Phase’s manufacturing division and the repair division have been sharing the space in the facility that opened last fall. Earlier this year it became apparent that both divisions needed more space to allow for growth, so plans were put into action to double our existing square footage in order to facilitate these needs.

Upgrading Machinery

This past November, the cylinder manufacturing division inhabited the newly completed addition of our building and are now in a great position to increase our efficiency and take on more business

New shop for manufacturing division before all the equipment was set up.

New shop after it was set up and running for the manufacturing division.

January 2014 Newsletter

Welcome to Our January 2014 Newsletter

What more can we say except THANK YOU to all of our faithful customers; to those who have been with us from the beginning and those who have joined us along the way. May we continue to provide the service you have come to expect from Speed Wrench for the next 25 years!

~ The Management

Moving In & Ready For Business

July 2013 Newsletter

Welcome to Our July 2013 Newsletter

As we approach the half way mark of 2013, there have already been a lot of changes since our January newsletter. We can confirm we have contracted with Lamar Construction to build our new facility on the lot just South of our current location. This building will be dedicated to our All Phase Hydraulics division. They have experienced tremendous growth, as have all the other divisions, and we have simply run out of space in our building and the parking lot. This new building should relieve some of that congestion. We hope to have the building up and operating by January so when the busy spring season begins in 2014, we will be ready to service the needs of you, our customers, even BETTER. Feel free to stop in or drive by and watch as we progress through this building project. Just as we are interested in your business, we appreciate your interest in ours, and welcome any suggestions or ideas for improvement. Thank you!
~ The Management

Welcome To The Team

In the past few months our division has continued to stay busy, and the work continues to come in. In order to continue keeping up with demand, we are continuing
to hire. Jason Bertsch has been hired to help us out in the shop, cleaning and assisting the other shop technicians. Also, Mike Nind has come on board to help assist in quoting the repair work as it comes in.

William Michael Nind – Born and raised in the little town of Free Soil, MI, Mike comes to us with over 15 years of experience in remanufacturing hydraulic components. He spent the last 6 of those years as a shop foreman for Abbot Hydraulics where he managed the technicians, and scheduled and quoted work. In his free time he enjoys to go out in the woods to hunt, fish, camp and ride ATVs. We were thrilled to have Mike join our team this past May.

Jason Bertsch – We at All Phase would like to introduce one of our newest employees, Jason Bertsch. Jason is married to Tarah and they have three children. Upon hearing about the job at All Phase, Jason decided to leave his job of driving truck. When he is not at work, he spends his time fishing and hunting.

Welcome to the team Jason!

The guys working hard in the shop!

January 2013 Newsletter

Welcome to Our January 2013 Newsletter

After a year of political rancor in Washington, we now know who our President is for the next four years. We rest contently in the fact that the Lord is in control of all things, and ask you to pray for our President and elected officials, while they serve, to carry out their callings leading our country in a right and proper way.
* Speed Wrench, as well as many other businesses, has cautious concern about the dealings in Washington and how the “fiscal cliff”, taxes and our country’s deficit will affect our businesses. However, this has not stopped us from continued expansion and pursuit of new opportunities. * Even as we pray for our elected officials to lead this country, so we pray the Lord will use us to lead this company in the New Year of 2013.
~ The Management

New Additions

theodore

Theodore Belliel – Technician: Over the past six months, there has been some changes made to our division. Due to growing demand in our pump department, we shifted Mitch
from our cylinder department to the pump department. On October 8, we hired Ted Belliel to replace Mitch in the cylinder department. Ted was previously employed at J&R Auto for three years working in the parts department and in yard. Ted has been married to his wife Sharon for 22 years and they currently reside in the Sand Lake area. In his spare time, Ted likes to go hunting, fishing and snowmobiling. Welcome Ted!

In effort to keep our equipment up to date, we have replaced our tired shop press with a new 100 ton press!

100-ton-press

July 2012 Newsletter

Welcome to Our July 2012 Newsletter

Welcome to our biannual edition of “The Wrench”. Time sure flies! It’s hard to believe already half the year of 2012 has passed us by! There has been a LOT of activity
since the first of January. Here is a brief summary of some activities in the last six months:
* Our ESOP (Employee Stock Ownership Plan) was finalized.
* We purchased additional property just south of our current facility for future expansion.
* We are renting additional space at Hudsonville storage for our expanding truck dock business.
* We have expanded our areas of business into Detroit and Toledo, OH for our Compactor and Truck Divisions.
* Since January 1 we have hired 10 additional employees! As you see, there has been a lot of exciting things happening at Speed Wrench

and, Lord willing, many more to come!

~ The Management

All Phase Logo

Welcome Steve, Welcome Back Gary!

Steve Griffin

All Phase Hydraulics would like to welcome back Gary Sluis after being absent from us for seven months. He is now back and working at his lathe, turning parts as if he had never left! Glad to have you back Gary! 

We are also welcoming new team member Steve!

January 2011 Newsletter

Welcome to Our January 2011 Newsletter

2011. What will it bring we ask’? Nobody knows for sure but we face it in the confidence that the Lord will direct our ways. We at Speed Wrench have experienced this direction in a very real way this past year. We entered the new year with a certain amount of fear and trepidation not knowing what the economy held in store. Looking back we stand amazed again at the Lord’s goodness in 2010. He led us by giving us work for the day, every day and ultimately a successful year. Praise be to Him! Many of the new ventures we started in 2010 have had a chance to develop and gain trac­tion. You, our customer, have let it be known that you appreciate these new offerings. Thank you for your input and encouragement. You me the ones who help by suggesting new services and ideas. We cannot honor all of them, but we will ALWAYS look at those ideas that will enhance our services to you. OUR business is to help make YOUR business successful! We can help by maintaining your vehicles and equipment properly ·while you concentrate on growing your business. We arc excited about continuing that relationship in 20l l. Thank you!

From All Phase Hydraulics

We at the All Phase division have had a busy year! Not only have we had a full steady workload this year, but we have also had growing pains. The result of which has allowed us
to hire three new employees this year.

Brent Overway was hired in March as a parts runner primarily for the eastern side of the state. In August, we hired Tom Boorsma Jr. to work on the bench as cylinder technician. Finally we would like to welcome Jon Swiler who was hired in as a salesman. Jon’s territory includes primarily the central part of the state. If you have any hydraulic needs in that part of the state, give him a call at (517)348-6795.

Brent Overway
Jon Swiler
tom boorsma

July 2010 Newsletter

Welcome to Our July 2010 Newsletter

Finally, Summer! Warm weather! With it comes a renewed excitement about the future. We have noticed a nice uptick on work since spring. Maybe the weather has something to do vvith it but we have experienced a noticeable increase in workload company wide and a vvillingness on the part of you, our customers to make some long term commitments in regard to your repair needs. We continue to work very closely to give you the best value for your dollar and maximize your profit potential. Having just experienced (hopefully) a once in a lifetime economic dovvnturn we are cau­tiously optimistic about the future and will continue to be there to help you navigate these trou­bled waters. Thank you for your confidence in Speed Wrench. ~The Management


From All Phase Hydraulics & Machine

“Our service makes the difference” – and it shows lately.  We have experienced a recent surge in our cylinder repair business in the last couple months.

Though we can manufacture brand new hydraulic cylinders of all sizes and applications, it is often the most cost effective solution to simply repair your existing broken cylinder.  We clean and rebuild cylinders and hydraulic power units to a “like-new” condition.  We can pickup, deliver, and provide a customized solution to meet your unique needs.  Call us with you hydraulic challenges.  616-669-3975


View the Full Newsletter Below

all phase hydraulics newsletter